AS 4685.3:2021

09-08 comment

AS 4685.3:2021 pdf free.Playground equipment and surfacing Part 3: Additional safety requirements and test methods for slides (EN 1176-3:2017, MOD).
For attachment slides where the platform is used as the entire starting section, the requirements for protection against falling in EN 1176-1:2017, 4.2.4, apply.
For free-standing slides, the guarding section shall have a height of at least that required for platforms at one point (see Figure ib)).
4.3.3 Width
The width of the starting section shall be equal to that of the sliding section. The starting section shall be designed so that it is aligned with the direction of the initial sliding movement. If the starting section is a platform or the extension of a platform the starting section may be greater in width than the sliding section.
4.3.4 Lateral protection (sides)
The lateral protection of the starting section shall be a continuous unbroken extension of the lateral protection of the sliding section.
The construction of the lateral protection may be from multiple components. Any joints should be free from entrapment and not present a hazard to users.
Any variations in the angle of declination of the top of the lateral protection in the sliding direction shall be made with a radius of at least 50 mm at some point.
4.4 Sliding section
4.4.1 Length and angle
The length of the initial straight sliding section shall not exceed 7 000 mm.
The length of the second and subsequent straight sliding sections after a bend shall not exceed 5 000 mm.
NOTE 1 Background information and rationale regarding limiting straight sliding sections are given in informative Annex B.
The angle of declination to the horizontal of the sliding section shall not exceed 600 at any point and shall not exceed an average of 400. The declination of the sliding section shall be measured from the centreline.
If the changes in angle of declination of slides are greater than 15°, other than for the transitional part between the starting section and the sliding section, the angle shall have a radius as follows:
a) for the initial 2 000 mm change in height, at least 450 mm; and
b) for the remainder of the slide, at least 1 000 mm.
NOTE 2 This to help prevent the user from becoming involuntarily airborne.AS 4685.3 pdf download.

Download It Now Download Here
ATTENTION: I REALLY NEED YOUR SUPPORT.THANKS A LOT.
AS NZS 60598.2.17:2019 AS pdf free download

AS NZS 60598.2.17:2019

AS NZS 60598.2.17:2019 pdf free.Luminaires Part 2.17: Particular requirements—Luminaires for stage lighting, television and film studios (outdoor and indoor). 17.7.2 The luminaires for certain types of high-intensity discharge lamp, where an explosion risk is declared by the lamp manufacturer, shall incorporate a device to prevent immediate access to the lamp after switching-off or shall be marked in accordance with the...
Download
AS NZS 4859.1:2018 AS pdf free download

AS NZS 4859.1:2018

AS NZS 4859.1:2018 pdf free.Thermal insulation materials for buildings Part 1: General criteria and technical provisions. 2.1 GENERAL This Section provides performance criteria and technical provisions for materials to be used in the thermal insulation of buildings and building services. In addition to this Section the insulating material shall— (a) meet packaging and labelling requirements of Section 3; (b) where...
Download
AS NZS 2442.2:2021 AS pdf free download

AS NZS 2442.2:2021

AS NZS 2442.2:2021 pdf free.Performance of household electrical appliances一Rotary clothes dryers Part 2: Energy efficiency labelling requirements. Section 2 Test requirements, calculations and algorithms for the energy rating label 2.1 General This Section sets out the test requirements, equations and procedures br calculating values of the comparative energy consumption (CEC), and star rating, which appear on an energy rating label....
Download

LEAVE A REPLY

Anonymous netizen Fill in information