AS/NZS 62841.3.10:2017 pdf free

02-24 comment

AS/NZS 62841.3.10:2017 pdf free.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part3.10: Particular requirements for transportable cut-off machines.
This clause of Part 1 is applicable, except as follows:
This part of lEG 62841 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive
— bonded reinforced wheel of Type 41, or
— diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm
and with
— a rated no-load speed not exceeding a peripheral speed of the wheel of 100 rn/s with the maximum wheel diameter and
— a wheel diameter range of 250 mm to 410 mm.
This standard does not apply to:
— transportable mitre saws;
— transportable tile saws;
— transportable metal saws.
2 Normative references
This clause of Part 1 is applicable except as follows:
ISO 603-15, Bonded abrasive products — Dimensions — Part 15: Grinding wheels for cuttingof f on stationary or mobile cutting-off machines
ISO 630 (all parts), Structural steels
4 General requirements
This clause of Part 1 is applicable.
5 General conditions for the tests
This clause of Part 1 is applicable, except as follows:
5.17 Addition:
The mass of the tool shall include the wheel guard and the fence.
Further parts such as carrying means that are required in accordance with the user instructions shall be included in the mass.
6 Radiation, toxicity and similar hazards
This clause of Part 1 is applicable.
7 ClassIfication
This clause of Part 1 is applicable.
8 Marking and instructions
This clause of Part 1 is applicable, except as follows:
8.1 Addition:
Tools sha’l also be marked with:
— the rated no-load speed of the output spindle.

Download It Now Download Here
AS NZS 60598.2.17:2019 AS pdf free download

AS NZS 60598.2.17:2019

AS NZS 60598.2.17:2019 pdf free.Luminaires Part 2.17: Particular requirements—Luminaires for stage lighting, television and film studios (outdoor and indoor). 17.7.2 The luminaires for certain types of high-intensity discharge lamp, where an explosion risk is declared by the lamp manufacturer, shall incorporate a device to prevent immediate access to the lamp after switching-off or shall be marked in accordance with the...
AS NZS 4859.1:2018 AS pdf free download

AS NZS 4859.1:2018

AS NZS 4859.1:2018 pdf free.Thermal insulation materials for buildings Part 1: General criteria and technical provisions. 2.1 GENERAL This Section provides performance criteria and technical provisions for materials to be used in the thermal insulation of buildings and building services. In addition to this Section the insulating material shall— (a) meet packaging and labelling requirements of Section 3; (b) where...
AS NZS 2442.2:2021 AS pdf free download

AS NZS 2442.2:2021

AS NZS 2442.2:2021 pdf free.Performance of household electrical appliances一Rotary clothes dryers Part 2: Energy efficiency labelling requirements. Section 2 Test requirements, calculations and algorithms for the energy rating label 2.1 General This Section sets out the test requirements, equations and procedures br calculating values of the comparative energy consumption (CEC), and star rating, which appear on an energy rating label....


Anonymous netizen Fill in information