BS 7423:1991 pdf free

04-07 comment

BS 7423:1991 pdf free.Specification for safety requirements for children’s travel cots of internal base length not less than 900 mm.
BS 7423 specifies safety requirements for children’s travel cots of internal base length not less than 900 mm. It covers materials, dimensions and construction.
NOTE 1 Guidance on t.he selection and use of materials is given in Appendix A.
NOTE 2 The titles of the publications referred to in this standard are listed on the inside back cover.
4 Dimensions
4.1 The minimum distance between the mattress base and the top edge of the sides and ends of travel cots sold without a mattress shall be not less than 595 mm.
4.2 If a mattress is sold as part of the travel cot, the mattress shall be not more than 40 mm shorter or narrower than the mattress base, and the depth of the mattress shall not reduce the internal height of the cot above the mattress to less than 495 mm. These measurements shall be calculated by subtracting the length or width of the mattress from the length or width of the mattress base or the depth of the mattress from the depth from the mattress base to the top edge of the sides or ends of the cot.
NOTE Any mattress sold as part of the travel cot should comply with BS 1877-10:1982 with the exception of clause 5.
4.3 If a mattress is not to be sold as part of the travel cot. the manufacturer shall specify the size of the mattress to be used with the cot as not less than Xmm in length and Ymm in width nor more than X+ 40 mm in length or more than Y+ 40 mm in width [see 6.2 a)]. The size of the mattress as specified shall not allow a horizontal gap greater than 40 mm at any point between the mattress and the inside of the cot.
4.4 There shall be no horizontal bars, ledges or other parts within the travel cot, except the bottom side and end-rails, less than 510 mm above the mattress base.
4.5 Where mesh is used in the construction of travel cots, when tested in accordance with Appendix C the probe shall not pass through the mesh and the threads of the mesh shall not break.BS 7423 pdf download.

Download It Now Download Here
ATTENTION: I REALLY NEED YOUR SUPPORT.THANKS A LOT.
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...
Download

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
Download
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...
Download

LEAVE A REPLY

Anonymous netizen Fill in information