BS EN 12002:2002 pdf free

05-01 comment

BS EN 12002:2002 pdf free.Adhesives for tiles Determination of transverse deformation for cementitious adhesives and grouts.
BS EN 12002 1 Scope This European Standard specifies the test method to be used to determine the transverse deformation of cementitious ceramic tile adhesives and grouts. This standard is applicable to all cementitious ceramic tile adhesives and grouts for internal and external tile installations on floors and walls. It is not applicable to ceramic tile adhesives and grouts which possess elastomeric properties, such as many dispersions and reaction resin adhesives and grouts. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other kinds of tiles (natural and agglomerated stones, etc.), where these do not adversely affect these materials.
2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 196-1:1994, Methods of testing cement – Part 1: Determination of strength. EN 1066, Adhesives – Sampling.
EN 1067, Adhesives . Examination and preparation of samples for testing. EN 459-2, Building lime – Part 2: Test methods.
3 Principle The test described in this European Standard measures the deformability of cementitious adhesives and grouts,when subjected to a 3-point bending load, performed on test specimens of the stated dimension. The specimens are prepared and conditioned in accordance with the specific conditions described. 4 Sampling Take a sample of at least 2 kg of the adhesive or grout in accordance with EN 1066 and EN 1067. 5 Test conditions Standard conditions shall be (23土2)°C and (50+5) % R.H. and air velocity in the working area of less than 0,2 m/s.BS EN 12002 pdf download.

Download It Now Download Here
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...


Anonymous netizen Fill in information