BS EN 12385-3:2020 pdf free.Steel wire ropes一Safety.Information for use and maintenance.
BS EN 12385-3 This document specifies the type of information for use and maintenance of steel wire ropes to be provided by the rope manufacturer or to be included in the manufacturer’s handbook that accompanies a machine, piece of equipment or installation of which the steel wire rope forms a part. The particular hazards covered by this document are identified in Clause 4. For steel wire ropes conforming to Parts 8 and 9 used on cableway installations designed to carry persons, additional information for use and maintenance is given in EN 12927. For steel wire rope slings, specific information on use and maintenance is given in EN 13414-2. This document is not applicable to steel wire ropes manufactured before the date of publication of this
document by CEN.The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12385-2:2002+A1:2008，Steel wire ropes 一Safety 一Part 2: Definitions, designation and classification EN ISO 12100:2010, Safety of machinery一General principles for design一Risk assessment and risk reduction (ISO 12100:2010}This information shall include temperature limits, use in exceptionally hazardous conditions, first use,handling and installation and maintenance.An example of such information is given in Annex A.For stranded ropes this information shall include guidance on rope construction in relation to abrasionand wear, type of core in relation to crushing of the rope at the drum, wire finish in relation tocorrosion, direction of lay and type in relation to direction of coiling, rotational characteristics inrelation to use of a swivel and fleet angle effects.An example of such information is given in Annex B. Material health and safety information on steel wire rope and its component parts This information shall include details of all the individual materials that form part of the finished ropeand general information relating to occupational protective measures, emergency medical procedures,safety (including any fire or explosion hazards) and disposal.An example of such information is given in Annex C.BS EN 12385-3 pdf downlaod.