BS EN 1459-4:2020 pdf free

05-08 comment

BS EN 1459-4:2020 pdf free.Rough-terrain trucks – Safety requirements and verification.Additional requirements for variable-reach trucks handling freely suspended loads.
BS EN 1459-4 This document specifies the safety requirements and means of verification in addition to EN 1459-1:2017+A1:2020 and EN 1459-:2015+A1:2018 as applicable, for rough-terrain variable-reach trucks (hereafter referred to as trucks) designed and intended for handling suspended loads which can swing freely in one or more directions. It is applicable to trucks covered by EN 1459-1:2017+A1:2020 and EN 1459-2:2015+A1:2018.
This document does not apply to: 一 the lifting of suspended loads which by design of the load or the lifting attachments does not allow the load to swing freely in any direction;一 the handling of flexible intermediate bulk containers, as defined in ISO 21898:2004, carried under the forks of the truck or with attachments intended for this purpose; -any attachments / means used for lifting personnel; 一lifting accessories; 一freight container handling trucks;
mobile cranes [covered by EN 13000:2010+A1:2014).This document deals with all significant hazards, hazardous situations or hazardous events, related to
trucks handling a freely suspended load, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).This document does not deal with load limiter for attachments. This document is not applicable to rough-terrain variable-reach trucks designed and intended for handling suspended loads manufactured before the date of its publication. The following tests shall be carried out on each truck: a] dynamic structural test according to 5.2; and b] travelling / pick and carry test according to 5.3. For trucks produced in series, where the production techniques employed and the application of a duly documented quality control system make it possible to guarantee that every truck produced will have
identical characteristics when fully assembled, tests on adequate samples of the truck are considered as fulflling the above requirement.NOTE Static tests are specified in EN 1459-1:2017+A1:2020 and EN 1459-2:2015+A1:2018 as applicable. BS EN 1459-4 pdf download.

Download It Now Download Here
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...


Anonymous netizen Fill in information