BS EN 15746-3:2020 pdf free

05-12 comment

BS EN 15746-3:2020 pdf free.Railway applications一Track一Road-rail machines and associated equipment.Technical requirements for running.
BS EN 15746-3 This document deals with the technical requirements to minimize the specific railway hazards of self-propelled road-rail machines, as defined in EN 15746-1:2020, 3.1, henceforward referred to as machines, when designed and intended for running on European railways within the scope of European Directive 2007 /58/EC.The running mode is an option designed by the manufacturer which permits the use of the machine on a specified railway infrastructure without the need for special operational rules.NOTE 1 The use of special track safety equipment (i.e. part of automatic train protection systems) does not necessarily mean that the machine has a running mode; some Infrastructure Managers use such equipment as means of protection for machines in travelling and/ or working modes.NOTE 2 This document is written for 1 435 mm nominal track gauge; special requirements can apply for running on infrastructures with narrow gauge or broad gauge lines.Urban rail and railways utilizing other than adhesion between the rail and wheels are not included in this document.This document does not apply to the following: the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the Infrastructure Manager; travelling and working both on and off rails; running on urban rail.For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this European Standard.It shall be obvious to anyone checking the machine that these parts of the machine are locked in their stowed position. Furthermore, for locking devices operable from the cab, either a red warning light shall iluminate on the driver’s desk to indicate if any moveable part of the machine is not locked, or a green light shall indicate on the driver’s desk that all moveable parts of the machine are locked.BS EN 15746-3 pdf download.

Download It Now Download Here
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...


Anonymous netizen Fill in information