BS EN 17344:2020 pdf free

05-15 comment

BS EN 17344:2020 pdf free.Agricultural machinery一Self-propelled agricultural and forestry vehicles一Requirements for braking.
BS EN 17344 For the purpose of this document, the brake, all mechanical parts of the transmission and the control device, hereafter called ‘braking equipment’ shall not be regarded as liable to breakage if they are amply dimensioned, readily accessible for maintenance and exhibit safety features at least equal to those prescribed for other essential components (such as the steering system). The braking equipment shall be designed, constructed and fitted, so that it is capable of withstanding the stresses arising during normal operation for which the vehicle is designated it. Brake linings shall not contain asbestos. Unless otherwise specified, it is not permitted to fit any adjustable valves that would allow the performance of the braking system to be changed by the user of the vehicle such that, in service, it falls outside the requirements of this document. An adjustable valve that can only be operated by the manufacturer through the use of special tool or the provision of a tamper proof seal or both shall be permitted provided that the user of the vehicle is not able to adjust this valve, or that any user modification is readily identifiable. For Class IV vehicles, the wear of the service brakes shall be compensated by means of a system of automatic adjustment. In addition, the control device and the components of the transmission and of the brakes shall possess a reserve of travel and, if necessary, suitable means of compensation such that, when the brakes become heated or when the brake linings have reached a certain degree of wear, effective braking shall be ensured without immediate adjustment being necessary. It shall be possible for the wear of the service brakes to be compensated by means of a system of manual or automatic adjustment. It shall be possible to easily check this wear on service brake linings from the outside or underside of the vehicle, utilizing only the tools or equipment normally supplied with the vehicle, for instance, by the provision of appropriate inspection holes. Alternatively, acoustical or optical devices warning the driver at his driving position when lining replacement is necessary are acceptable. BS EN 17344 pdf download.

Download It Now Download Here
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...


Anonymous netizen Fill in information