BS EN 287-6:2018 pdf free

02-06 comment

BS EN 287-6:2018 pdf free.Qualification test of welders – Fusion welding – Part6:Cast irons.
The ability of a welder to follow written instructions and verification of a person’s skills are important factors in ensuring the quality of a welded product.
The testing of a welder’s skill in accordance with this standard depends on welding techniques and conditions used in which uniform rules are complied with, and standard test pieces are used.
The principle of this European Standard is that a qualification test qualifies the welder not only for the conditions used in the test, but also for all joints which are considered easier to weld on the presumption that the welder has received a specific training and/or has industrial practice within the range of qualification.
The qualification test can be used to qualify a welding procedure and a welder provided that all the relevant requirements. e.g. test piece dimensions, are satisfied.
This document specifies main requirements, limits, inspection conditions and acceptance requirements as well as related inspection documents of welders for welded cast iron test pieces and workpieces.
It provides a set of technical rules for a systematic qualification test of a welder’s skills, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner or examining body.
This document specifies the testing of a welder’s skill unless a higher level skill test is required.
The acceptance of a welder’s skill in accordance with this document implies a practical experience and knowledge regarding the welding process, materials and safety requirements (see Annex C).
This document is to be used when requirements on part of a customer, testing or monitoring body or other organization are postulated.
This document defines the qualification test of welders for the fusion welding of cast irons. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automated welding processes (see EN ISO 14732). Cast iron materials which are covered by this document are mentioned In 5.4.
The inspection document and certification are made out under the responsibility of the testing body.

Download It Now Download Here
ATTENTION: I REALLY NEED YOUR SUPPORT.THANKS A LOT.
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...
Download

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
Download
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...
Download

LEAVE A REPLY

Anonymous netizen Fill in information