BS ISO 20794-6:2020 pdf free

05-13 comment

BS ISO 20794-6:2020 pdf free.Road vehicles—Clock extension peripheral interface (CXPI)—Transport and network layer conformance test plan.
BS ISO 20794-6 This document specifies the transport and network layer conformance test plan, which tests the transportation of diagnostic communication, node configuration data and network layer services using the service interface parameters reported by the lower OSI layers and submitted to the higher OSI layers. The transport layer and network layer conformance test plan contain the following descriptions:  concept of operation conformance test plan; transport layer protocol conformance test plan;network layer services conformance test plan; and error detection conformance test plan.The following documents are referred to in the text in such a way that some or all of their content  constitutes requirements of this document. For dated references, only the edition cited applies. Forundated references, the latest edition of the referenced document (including any amendments) applies.  ISO/IEC 7498-1, Information processing systems一Open systems interconnection – – Basic reference model ISO 20794-2:2020, Road vehicles一Clock extension peripheral interface (CXPI)一Part 2: Application layer ISO 20794-3:2020, Road vehicles一Clock extension peripheral interface (CXPI)一Part 3: Transport and network layer ISO 20794-4:2020, Road vehicles一- Clock extension peripheral interface (CXPI)一Part 4: Data link layer and physical layer.The test system set-up follows the ISO/IEC 9646-1[1] and consists of a test system and a system under test (SUT) connected via the physical medium. The test system implements an upper tester (UT]) and a lower tester (LT). The test system uses set-up parameters (see Figure 2, key 1) for testing the communication with the IUT. The UT uses the test control protocol (see Figure 2, key 2) to control the LT. The point of control and observation (PCO) functionality between the UT of the test system and the UT App test stub in the SUT is provided by direct logical access to the abstract service primitive interface [ASPs (ETSs), PCO, see dashed line in Figure 2, key 3) and the associated parameters of the OSI layers as specified in the ISO 20794 series.BS ISO 20794-6 pdf download.

Download It Now Download Here
ATTENTION: I REALLY NEED YOUR SUPPORT.THANKS A LOT.
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...
Download

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
Download
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...
Download

LEAVE A REPLY

Anonymous netizen Fill in information