BS ISO 3529-2:2020 pdf free

05-03 comment

BS ISO 3529-2:2020 pdf free.Vacuum technology一- Vocabulary Vacuum pumps and related terms.
BS ISO 3529-2 This document gives definitions of vacuum pumps and related terms. It is a continuation of ISO 3529-I which defines general terms used in vacuum technology.2 Normative references ISO 3529-1:2019, Vacum technology一Vocabulary 一Part 1: General terms ISO 21360-1:2012, Vacum technology一Standard methods for measuring vacuwm-pump performance一Part 1: General description 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the fllowing addresses:ISO Online browsing platform: available at hts:// Electropedia: available at Vacuum pumps 3.1.1 vacum pumpdevice for creating, improving and/or maintaining a vacuum Note 1 to entry: Two basically distint categories may be considered: gas transfer pumps (3.1.2) and gas gathering vacuum pumps (3.132) Note 2 to entry: Some definitions given in ISO 3529-1 are repeated in this document in deferent terms to adapt to vacuum pumps. Note 3 to entry: Vacuum Is defined in IS0 3529-1. Note 4 to entry: A classification table for vacuum pumps is described in Annex A. 3.1.2 gas transfer vacuum pumps vacuum pump (3.1.1) that transports gas molecules from the inlet to the outlet (3.2.3) of the vacuum pump by means of positive displacement or transfer of kinetic momentum.claw vacuwm pump rotary positive displacement vacuum pump (3.1.3) in which two claw-shaped rotors, interlocked and synchronized, rotate in opposite directions moving past each other and the housing wall with a small clearance and without touching Note 1 to entry: Claw vacuum pumps are designed with one or more compression stages.3.1.17kinetic vacum pump vacuum pump (3.11) in which a gas or gas molecules can be displaced from the pump inlet to the outlet (3.2.3) either mechanically (rotating it at high speed or by providing an impulse in the direction of flow) or by the use of another fluid (providing also an impulse in the direction of flow) or using an electrical potential to displace gas ions Note 1 to entry: Three categories can be considered: mechanical kinetic pumps (3.118 3..22) fluid entrainment pumps (3.1.23-3.1.30) and ion tronsfer pumps (3.1.31]. BS ISO 3529-2 pdf download.

Download It Now Download Here
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...


Anonymous netizen Fill in information