BS ISO 7409:2018 pdf free

02-06 comment

BS ISO 7409:2018 pdf free.Fertilizers — Marking — Presentation and declarations.
1 Scope
This document specifies the procedure for marking containers or labels for fertilizers.
This document is applicable to all fertilizers in containers or hulk.
4 Principle
Estahlishnwnt of the label size, the position of the declarations and the size of the characters (letters and figures) so as to enable the user to identify the fertilizer and to determine its characteristics. These details will vary according to whether the container holds:
— more than 25 kg (or 25 1) of fertilizer,
— from 5 kg to 25 kg (or 5 Ito 25 I) of fertilizer.
— less than 5 kg (or 5 1) of fertilizer, or
— bulk fertilizer.
Sec FigunA.1 C.1 and E.l for examples of marking and labelling.
NOTE Ton bags are usually considered as bulk fertilizer.
5 General requirements
5.1 Declarations shall be legible and indelibly marked on a uniform and contrasting background.
5.2 Any declarations on the marking should be truthful, accurate and extremely clear.
5.3 False, deceptive, exaggerated, untruthful or misleading claims shall not be made on the product packaging or label.
5.4 The smallest letters used in declaration or marking shall be clear, firm and readable.
6 Types of marking
Marking can take the form of package markings, quality assurance documents, labels, electronic labels, etc. The information can be added to bags by printing, labels, stickers, etc. The use of electronic labels, such as two-dimensional (2D) codes, is encouraged. Electronic labels should be legible and conspicuous on a discrete area of the principal display panel and shall include, at a minimum, the information related to package markings.
7 Pre-marked containers
7.1 Containers holding more than 25 kg (or 25 1) of fertilizer
7.1.1 Marking technical details
Position: A rectangular space for marking shall be located in the centre of one of the main faces of the container/label. The edges of the space shall be parallel to the edges of the container.
Measurement: Its edges shall be at least 65 % of the length of the container. The total area for marking shall be at least 10 % of the face selected.
Label Information: The technical information of the label on the container should be easy to read. Any picture, brand or logo used in the marking should not obstruct the quick identification of text messages. Declarations shall he marked within the above-mentioned area.BS ISO 7409:2018 pdf free download.

Download It Now Download Here
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...


Anonymous netizen Fill in information