BS ISO 8528-3:2020 pdf free.Reciprocating internal combustion engine driven alternating current generating sets.
BS ISO 8528-3 This document specifies the principal characteristics of alternating current (a.c.) generators under the control of their excitation control system when used for reciprocating internal combustion (RIC] engine driven generating set applications and supplements the requirements given in IEC 60034-1. It covers the use of such a.c. generators for land and marine applications, excluding generating sets used on aircraft or to propel land vehicles and locomotives.NOTE For some specific applications (e.g. essential hospital supplies, high-rise buildings, operation parallel with the grid), supplementary requirements can be necessary. The provisions of this document can be regarded as the basis for establishing any supplementary requirements.For a.c. generating sets driven by other reciprocating-type prime movers e.g. steam engines) the provisions of this document can be used as basis for establishing these requirements.The degree of protection provided by the enclosure of the a.c. generator (IP-code) shall be specified in accordance with IEC 60034-5 and agreed between the a.c. generator manufacturer and the generating set manufacturer. The a.c. generator manufacturer shall assure, i.e. by verification or graphical analysis,that the intended degree of protection will be provided under all normal conditions of use.The method of cooling [IC-code) shall be specified in accordance with IEC 60034-6 and agreed between the a.c. generator manufacturer and the generating set manufacturer.The type of a.c. generator construction, mounting arrangement and terminal box position (IM-code) shall be specified in accordance with IEC 60034-7 and agreed between the a.c. generator manufacturer and the generating set manufacturer.For a.c. generators used on board ships and offshore installations which are subject to the rules of a classification society, it is presupposed that the additional requirements of the classification society are observed. The classification society name shall be stated by the generating set manufacturer prior to
placing the order.BS ISO 8528-3 pdf downlaod.