ISO PDF Download

BS EN 2451:2019 pdf free.Aerospace series- Steel 31Ni10- 1 230 MPa≤Rm ≤1420MPa一Forgings-De≤40mm. 1 Scope ; This document specifies the requirements relating to: Steel 31Ni10 1 230 MPa≤Rm≤1 420 MPa Forgings De≤40 mm for aerospace applications. ASD-STAN designation: FE-PL73. 2 Normative references The following documents are referred to in the text in such a way that some or all of their...

BS 8627:2019 pdf free.Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions. The qualification procedure for aerospace standard products (e.g. according to EN 9133 or another in aerospace accepted and established qualification procedure) shall be used and documented according...

BS EN 4604-003:2019 pdf free.Aerospace series - Cable, electrical,for signal transmission. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)...

BS EN 2816:2019 pdf free.Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings -aorD≤200mm-Rm≥965MPa. 1 Scope This document specifies the requirements relating to: Steel FE-PM1 802 (X5CrNiCu15-5) Consumable electrode remelted Solution treated and precipitation treated Forgings aorD≤200mm Rm≥965 MPa for aerospace applications. 2 Normative references The following documents are referred to...

BS EN 3475-418:2019 pdf free.Aerospace series - Cables, electrical, aircraft use - Test methods. 4.1 General Various bi-metal conductors exist among which the most usual are tin-coated copper, copper clad steel and copper clad aluminium. Inter-metallic compounds may appear at the interface of the various layers of such conductors. As these compounds have generally an increasing growth rate when exposed...

BS EN 2465:2019 pdf free.Aerospace series - Steel X2CrNi18-9 (1.4307)-Softened - 450 MPa≤Rm≤680 MPa- Bars for machining- 4 mm≤De≤100 mm. 1 Scope This document specifies the requirements relating to: Steel X2CrNi18-9 (1.4307) Softened 450MPa≤Rm≤680MPa Bars for machining 4mm≤De≤100mm for aerospace applications. 2 Normative references The following documents are referred to in the text in such a way that some or...

BS EN 3645-010:2019 pdf free.Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. 1 Scope This European Standard specifes the characteristics of hermetic receptacles with jam nut mounting in the family of circular, electrical connectors, with triple start threaded coupling. It applies to models in Table 3. For plugs and...

BS EN 2638:2019 pdf free.Aerospace series-Aluminium alloy 2024-T3 - Extruded bar and section- 1,2 mm≤(a orD)≤ 1 50 mm with coarse peripheral grain control. 1 Scope This document specifies the requirements relating to: Aluminium alloy 2024-T3 Extruded bar and section 1,2 mm (a or D) 150 mm with coarse peripheral grain control for aerospace applications. 2 Normative references The following...

BS EN 3378:2019 pdf free.Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets- 1,6 mm≤D≤10 mm. 1 Scope This document specifies the requirements relating to: Titanium TI-P99002 Annealed Wires for rivets 1,6 mm≤D≤10 mm for aerospace applications. 2 Normative references The following documents are referred to in the text in such a way that some or all of...

BS EN 2959:2019 pdf free.Aerospace series-H eat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked-Bar for forged fasteners-3 mm≤D≤30 mm. 1 Scope This document specifies the requirements relating to: Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) Solution treated and cold worked Bar for forged fasteners 3mm≤D≤30mm for aerospace applications.2 Normative references The following documents are referred to in the text...