BS EN 12697-34:2020 pdf free.Bituminous mixtures—Test methods.Marshall test. BS EN 12697-34  The compacted specimens shall be de-moulded, ensuring that they are cooled in air to avoid any danger of deformation and then tested in accordance with 6.1.1 and 6.1.3. After de-moulding, wait at least 4h before further testing begins. All tests shall be completed within 32 h of de-moulding. Specimens...
BS EN 12697-45:2020 pdf free
BS EN 12697-45:2020 pdf free.Bituminous mixtures - Test methods.Saturation Ageing Tensile Stiffness (SATS) conditioning test. BS EN 12697-45 This document specifies a test method to assess the durability of adhesion in base and binder course asphalt mixtures. The Saturation Ageing Tensile Stiffness (SATS) conditioning regime is used to age the specimens in the presence of water. A comparative test for...
BS EN 12697-29:2020 pdf free
BS EN 12697-29:2020 pdf free.Bituminous mixtures - Test methods.Determination of the dimensions of a bituminous specimen. BS EN 12697-29 1 Scope This document specifies a test method for determining the dimensions of cylindrical, rectangular or non-rectangular bituminous test specimens by measurement. The test is applicable to laboratory-made specimens, trimmed by sawing, or specimens from cores cut from the road, trimmed...
BS EN 12697-21:2020 pdf free
BS EN 12697-21:2020 pdf free.Bituminous mixtures - Test methods.Indentation using plate specimens. BS EN 12697-21 1 Scope This document specifies a test method for measuring the indentation of mastic asphalt when it is penetrated at a given temperature, load and for a fixed time period by a standardized cylindrical indentor pin with a circular flat-ended base. This document applies to...
BS EN 12697-28:2020 pdf free
BS EN 12697-28:2020 pdf free.Bituminous mixtures - Test methods,Preparation of samples for determining binder content, water content and grading. BS EN 12697-28 This document describes test methods for preparing test portions for the determination of the binder,water content and grading of samples of bituminous mixtures, when the sample submitted to the laboratory has a mass greater than or equal to...
BS EN 12697-20:2020 pdf free
BS EN 12697-20:2020 pdf free.Bituminous mixtures - Test methods.Indentation using cube or Marshall specimens. BS EN 12697-20 This document specifes a test method for determining the depth of indentation of mastic asphalt and other asphalt, when force is applied to them via a cylindrical indentor pin with a circular flat-ended base. This document applies to aggregates of maximum nominal size...