AS 5236.1:2021 pdf free – Cranes — Limiting and indicating devices Part 1: General

09-08 comment

AS 5236.1:2021 pdf free.Cranes — Limiting and indicating devices Part 1: General (ISO 10245-1:2008, MOD).
4.3.2 Operating requirements
4.3.2.1 When the load on the crane exceeds the rated capacity, the rating capacity limiter shall override the controls of the crane to prevent any condition that will increase the overload.
For particular crane types, reference should be made to ISO 10245-2, Iso 10245-3, ISO 10245-4 or ISO 10245-5 for details of motions that will increase the overload.
4.3.2.2 The rated capacity limiter shall not prevent the crane operator from returning the controls to the “stop” position nor from initiating actions that will move the crane to a reduced-loading or unloaded condition.
4.3.2.3 The rated capacity limiter, once triggered, shall continuously override the controls concerned until the overload has been removed and the relevant control lever has been returned to the neutral position.
4.4 Rated capacity indicators
4.4.1 Operating requirements
4.4.1.1 The rated capacity indicator shall give visual or audible warnings, or both, for all motions of the crane that induce a load in excess of the rated capacity as shown in the information supplied by the manufacturer for the particular crane.
4.4.1.2 The rated capacity indicator shall
a) for those cranes where the rated capacity varies with the position of the load, warn the crane operator when the rated capacity is approached,
b) warn the crane operator and persons in the danger zone when the rated capacity limiter is activated,
c) for those cranes where a limiter override is provided, warn the crane operator and persons in the danger zone whenever the rated limiter has been overridden.
4.4.1.3 When the rated capacity is approached, the rated capacity indicator shall give a warning at a value which gives the crane operator time to react to the warning and prevent the crane from being overloaded.
For particular crane types, reference should be made to ISO 10245-2, ISO 10245-3, ISO 10245-4 or ISO 10245-5 for details of motions that will increase the overload.AS 5236.1 pdf download.

Download It Now Download Here
ATTENTION: I REALLY NEED YOUR SUPPORT.THANKS A LOT.
AS NZS 60598.2.17:2019 AS pdf free download

AS NZS 60598.2.17:2019

AS NZS 60598.2.17:2019 pdf free.Luminaires Part 2.17: Particular requirements—Luminaires for stage lighting, television and film studios (outdoor and indoor). 17.7.2 The luminaires for certain types of high-intensity discharge lamp, where an explosion risk is declared by the lamp manufacturer, shall incorporate a device to prevent immediate access to the lamp after switching-off or shall be marked in accordance with the...
Download
AS NZS 4859.1:2018 AS pdf free download

AS NZS 4859.1:2018

AS NZS 4859.1:2018 pdf free.Thermal insulation materials for buildings Part 1: General criteria and technical provisions. 2.1 GENERAL This Section provides performance criteria and technical provisions for materials to be used in the thermal insulation of buildings and building services. In addition to this Section the insulating material shall— (a) meet packaging and labelling requirements of Section 3; (b) where...
Download
AS NZS 2442.2:2021 AS pdf free download

AS NZS 2442.2:2021

AS NZS 2442.2:2021 pdf free.Performance of household electrical appliances一Rotary clothes dryers Part 2: Energy efficiency labelling requirements. Section 2 Test requirements, calculations and algorithms for the energy rating label 2.1 General This Section sets out the test requirements, equations and procedures br calculating values of the comparative energy consumption (CEC), and star rating, which appear on an energy rating label....
Download

LEAVE A REPLY

Anonymous netizen Fill in information