AS ISO 16714:2021 pdf free.Earth-moving machinery一Recyclability and recoverability一Terminology and calculation method.
In order to be recyclable, a component part or material shall be linked to a proven recycling technology. At this step, at least the following machine component parts, materials or both shall also be taken into account:
— engine;
— hydraulic circuit components (hydraulic pump, hydraulic control valve, swing drive motor, travel drive motor, etc.) excepting flexible hoses, filter cartridges and accumulators;
— operator’s cab, including window glass, cab door (if disassembling possible) and operator’s seat;
— boom;
— arm;
— counterweight;
— suspension system.
The reusability of a component part shall also be subject to considerations of safety and environmental hazards.
Determine the mass, m, as the sum of the masses of all parts considered as reusable or recyclable.
5.3.3 Metals separation — Determination of mM
At this step, all metals, both ferrous and non-ferrous, that have not already been accounted for in the previous steps shall be taken into account. Both ferrous and non-ferrous metals are considered as recyclable.
Determine the mass, mM, as the sum of the mass of the metal remaining in the machine after the previous steps.
5.3.4 Non-metallic residue treatment一. Determination of mτr and MTe Other materials remaining (i.e. those not taken into account at the pretreatment, dismantling and metals separation steps) constitute the non-metallic residue. At this step, the residual non-metallic recyclable materials, or both these and the residual non-metallic recoverable materials, may be taken into account. Determine mTr as the sum of the mass of non-metallic residue considered as recyclable on the basis of proven recycling technologies (see Table A.1); Determine mTe, as the sum of the remaining masses that can potentially be used for energy recovery after determination of mp, mD, mM and mTr. NOTE Technologies for energy recovery of polymers and elastomers are industrialized on a large scale, world- wide. Polymers, elastomers and other modified organic natural materials can potentially be recovered through those technologies.AS ISO 16714 pdf download.