BS EN 13629:2020 pdf free

05-02 comment

BS EN 13629:2020 pdf free.Wood flooring – Solid individual and pre-assembled hardwood boards.
BS EN 136291 Scope  boards with grooves and/or tongues for internal use as flooring. This document covers hardwood boards
with or without surface coating. This document does not cover solid parquet elements. (See Annex C). 2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 351-1, Durability of wood and wood-based products一Preservative-treated solid wood一Part 1: Classification of preservative penetration and retention EN 460, Durability of wood and wood based products一Natural durability of solid wood – – Guide to the durbility requirements for wood to be used in hazard classes EN 1309-3, Round and sawn timber一Methods of measurements一Part 3: Features and biological degradations EN 1534, Wood flooring and parquet一Determination of resistance to indentation一Test method EN 13183-1, Moisture content of a piece of sawn timber一Part 1: Determination by oven dry method EN 13183-2, Moisture content of a piece of sawn timber 一Part 2: Estimation by electrical resistaince method EN 13647, Woodfooring and wood panelling and cadding一Determination ofgeometrical characteristics 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 844:2019, EN 13756:2018 and the following apply. IS0 and IEC maintain terminological databases for use in standardization at the fllowing addresses: IEC Electropedia: available at ht://ww electropedia.org/ ISO Online browsing platform: available at https:/ /www.iso.org/obp 3.1 solid individual hardwood board
wide and generally long solid (single layer) hardwood element which has parallel sides, is machined toa regular thickness and profile(s) with profiled edges and ends and is capable of being assembled with other analogous elements (see Figure 1] Tables 1 to 4 define the classification relating to appearance rules for the face and for the non-visible parts (back and edges) of an element of the most commonly used species for solid wood flooring as defined in this standard. BS EN 13629 pdf download.

Download It Now Download Here
ATTENTION: I REALLY NEED YOUR SUPPORT.THANKS A LOT.
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...
Download

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
Download
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...
Download

LEAVE A REPLY

Anonymous netizen Fill in information