DIN EN 3660-005:2019 pdf free.Aerospace series -Cable outlet accessories for circular and rectangular electrical and optical connectors -Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief – Product standard; German and English version EN 3660-005:2018.
1 ScopeThis European Standard defines a range of cable outlets, style A, 90° unsealed with clamp strain relief for use under the following conditions:  Associated electrical connector(s) : EN 3660-002 Temperature range, Class N : 一65°Cto200°C Class W : -65°Cto 175 °C ClassK:-65°Cto260°C ClassA:-65°Cto260°C
2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591- *, Aerospace series – Elements of electrical and optical connection一Test methods EN 2997 (all parts), Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65°C to 175 °C continuous, 200°Ccontinuous, 260 °C peak EN 3660-001, Aerospace series一Cable outlet accessories for circular and rectangular electrical and optical connectors一Part 001: Technical specification EN 3660-002, Aerospace series – – Cable outlet accessories for circular and rectangular electrical and optical connectors一Part 002: Index of product standards 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses:  ● IEC Electropedia: available at http://www.electropedia.org/
●ISO Online browsing platform: available at http:/ /www.iso.org/obp 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure 1 and Table 1. For interface dimensions, see 4.2.NOTE 1 For details X and Y, see 4.2.2. NOTE2 Coupling nut to be captive on cable outlet body but free to rotate. NOTE 3 Dimension K is the dimension for the clamp in its maximum in the closed position for M1 entry size. NOTE 4 Valley of start of tooth to be at vertical centre line of accessory at position shown:Within土3° for shell sizes 08-12  Within土2° for shell sizes 14-18 Within土1° for shell sizes 20 and larger.The location of blind holes axis can be left to the manufacturer’s preference. Location of blind holes is not mandatory.DIN EN 3660-005 pdf download.