ISO 12671:2021 pdf free download ISO pdf free download

ISO 12671:2021 pdf free download

ISO 12671:2021 pdf free download.Thermal spraying一Thermally sprayed coatings一Symbolic representation on drawings. 8 Instructions when using a separate parts’ list This clause applies when a component is represented by one or more drawings and a separate parts’ list. In such a case, the coating will be indicated on the drawing only by a position number (see Figure 6). Any instructions regarding...
ISO 15854:2021 pdf free download ISO pdf free download

ISO 15854:2021 pdf free download

ISO 15854:2021 pdf free download.Dentistry一Casting and baseplate waxes. 5.6 Behaviour on softening (Type 2) The wax shall soften without becoming sticky or crumbly and shall be mouldable without breaking or delaminating when tested in accordance with 4. This requirement shall not apply to baseplate preforms where a suitable square test piece cannot be cut. 5.7 Residue on artificial teeth (Type...
ISO 19905-3:2021 pdf free download ISO pdf free download

ISO 19905-3:2021 pdf free download

ISO 19905-3:2021 pdf free download.Petroleum and natural gas industries一Site-specific assessment of mobile offshore units - Part 3: Floating units. 5.2 Assessment The objective of the assessment is to show that the acceptance criteria are met. Annex B provides a diagrammatic example of the process to be used in the site-specific assessment of a mobile floating unit. Other approaches may be...
AS NZS 60598.2.17:2019 AS pdf free download

AS NZS 60598.2.17:2019

AS NZS 60598.2.17:2019 pdf free.Luminaires Part 2.17: Particular requirements—Luminaires for stage lighting, television and film studios (outdoor and indoor). 17.7.2 The luminaires for certain types of high-intensity discharge lamp, where an explosion risk is declared by the lamp manufacturer, shall incorporate a device to prevent immediate access to the lamp after switching-off or shall be marked in accordance with the...
AS NZS 4859.1:2018 AS pdf free download

AS NZS 4859.1:2018

AS NZS 4859.1:2018 pdf free.Thermal insulation materials for buildings Part 1: General criteria and technical provisions. 2.1 GENERAL This Section provides performance criteria and technical provisions for materials to be used in the thermal insulation of buildings and building services. In addition to this Section the insulating material shall— (a) meet packaging and labelling requirements of Section 3; (b) where...
AS NZS 2442.2:2021 AS pdf free download

AS NZS 2442.2:2021

AS NZS 2442.2:2021 pdf free.Performance of household electrical appliances一Rotary clothes dryers Part 2: Energy efficiency labelling requirements. Section 2 Test requirements, calculations and algorithms for the energy rating label 2.1 General This Section sets out the test requirements, equations and procedures br calculating values of the comparative energy consumption (CEC), and star rating, which appear on an energy rating label....
AS NZS IEC 60331.2:2021 AS pdf free download

AS NZS IEC 60331.2:2021

AS NZS IEC 60331.2:2021 pdf free.Tests for electric cables under fire conditions 一Circuit integrity. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: • IEC Electropedia: available at • ISO Online browsing platform: available at 3.1 circuit...
AS 1141.19:2018 AS pdf free download

AS 1141.19:2018

AS 1141.19:2018 pdf free.Methods for sampling and testing aggregates Method 19: Fine particle size distribution in road materials by sieving and decantation. NOTE 1 Complete dispersion in the initial pours is not essential, provided that continual dilution with ammonia is carried out. The addition of ammonia and stirring will in most cases complete dispersion eventually. With heavy clays, the first...
AS NZS 62233:2021 AS pdf free download

AS NZS 62233:2021

AS NZS 62233:2021 pdf free.Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure (IEC 62233:2005 (ED. 1.0) MOD). 5.3 Measuring distances, positions and operating mode The measuring distances, sensor locations and operating conditions are specified in Annex A. The configuration and mode of operation during measurement shall be noted in the test report....
AS 4485.2:2021 AS pdf free download

AS 4485.2:2021

AS 4485.2:2021 pdf free.Security for healthcare facilities Part 2: Procedures guide. Many facilities process and store information on computers, or computer systems, as well as in hard copy form. When identifying information to be protected, it is important to look at both electronic (locally and remotely stored) and hard copy holdings. 3.4 Assessment of threats 3.4.1 Non-deliberate threats Not all...