AS NZS 2293.1:2018 pdf free – Part 1: System design, installation and operation AS pdf free download

AS NZS 2293.1:2018 pdf free – Part 1: System design, installation and operation

AS NZS 2293.1:2018 pdf free.Emergency lighting and exit signs for buildings Part 1: System design, installation and operation. 1.4 NORMATIVE REFERENCES The normative documents referenced in this Standard are listed in Appendix A. NOTE: Documents referenced for informative purposes are listed in the Bibliography. 1.5 DEFINITIONS For the purpose of this Standard, the definitions given in the NCC, as appropriate,...
09-08
Download
AS 2419.4:2021 AS pdf free download

AS 2419.4:2021

AS 2419.4:2021 pdf free.Fire hydrant installations Part 4: Storz fittings for firefighting purposes. 1.4.18 red ucer fitting that allows hoses and equipment of one diameter to connect to hoses and equipment of another diameter 1.4.19 relevant authority independent agency authorized by legislation or regulation to issue determinations, orders, or other instructions in respect of any subject covered by this Standard...
09-08
Download
AS NZS 2442.1:2021 pdf free – Rotary clothes dryers AS pdf free download

AS NZS 2442.1:2021 pdf free – Rotary clothes dryers

AS NZS 2442.1:2021 pdf free.Performance of household electrical appliances一Rotary clothes dryers Part 1: Methods for measuring performance, energy and water consumption. 3.1 General The specified measurements shall be conducted under the conditions specified in Clauses 3.2 to 3.7 and Appendix F. 3.2 Condition and installation of dryer The measurements shall be carried out on a dryer installed and used in...
09-08
Download
AS ISO ASTM 52901:2021 pdf free AS pdf free download

AS ISO ASTM 52901:2021 pdf free

AS ISO ASTM 52901:2021 pdf free.Additive manufacturing—General principles—Requirements for purchased AM parts. 4.3.3 Tolerances The tolerances shall be specified (e.g. general tolerances, see Iso 2768-1 and ISO 2768-2, and/or specific, ISO 1101), including the definition of functional (e.g. machining allowance for finishing or rework) and aesthetic or cosmetic zones, so that the part provider can orient the part according to...
09-08
Download
AS ISO ASTM 52902:2021 pdf free AS pdf free download

AS ISO ASTM 52902:2021 pdf free

AS ISO ASTM 52902:2021 pdf free.Additive manufacturing一Test artifacts一 Geometric capability assessment of additive manufacturing systems. 5.6 Discussion of file conversion When a CAD model is converted to AMF, STL (or any intermediate file format), sufficient fidelity shall be maintained to ensure that the test artifact produced from it fairly reflects the capabilities of the AM system under assessment. The file...
09-08
Download
AS 2699.3:2020 AS pdf free download

AS 2699.3:2020

AS 2699.3:2020 pdf free.Built-in components for masonry construction Part 3: Lintels and shelf angles (durability requirements). 3.1 Material selection Materials for lintels shall be in accordance with Table 3.1. Determination of the coating thickness of hot-dip galvanized lintels shall be in accordance with Appendix A. NOTE 1 The method set out in Appendix A for hot-dip galvanized lintels may be...
09-08
Download
AS 2671:2021 pdf free – Hydraulic fluid power AS pdf free download

AS 2671:2021 pdf free – Hydraulic fluid power

AS 2671:2021 pdf free.Hydraulic fluid power—General rules and safety requirements for systems and their components (ISO 4413:2010, MOD) 5.1.2 The control systems shall be designed in accordance with the risk assessment. This requirement is met when ISO 13849-1 is used. 5.1.3 The prevention of damage to the machine, system and the environment shall be considered. 5.2 Basic requirements for the...
09-08
Download
AS ISO 6302:2021 AS pdf free download

AS ISO 6302:2021

AS ISO 6302:2021 pdf free.Earth-moving machinery一Drain, fill and level plugs. 1 Scope This International Standard establishes the types, shapes and sizes of the parts of the plugs used in connection with the hand tools listed in ISO 4510-1 to permit easy removal and installation of plugs at the work-site. It does not set requirements, i.e. dimensions and materials, for the...
09-08
Download
AS 4685.4:2021 AS pdf free download

AS 4685.4:2021

AS 4685.4:2021 pdf free.Playground equipment and surfacing Part 4: Additional safety requirements and test methods for cableways. 4 Safety requirements 4.1 General Cableways shall conform to EN 1176-1 unless otherwise specified in this part of EN 1176. 4.2 Framework and fixing points for the cable Framework and fixing points for the cable shall be designed to withstand the computed loads...
09-08
Download